VTA750-1GC
Hot Air Generator Specifications:
|
| Model:
|
VTA750-1GC
(110V, 1kW)
Typical Picture as shown |
| Unit
Description: |
Model
VTA750-1GC belongs to the airtorch series of
hand-held hot air tool devices with continuous
hot air discharge of up to 750°C.
Such hot air guns find application in plastic
welding, heat shrinking
of thermo plastics, ceramic drying, on-site
heat treatment, plastic forming and many more.
The unique 2-way shell ( one perforated) construction
provides for efficient heat recovery and management,
which provides hi-temperature discharge at very
high efficiency.
This recuperating design eliminates radiant
heat loss while enhancing efficiency,
and maintains a cooler outer shell temperature.
Note : Parts of the surface
are hotter than 50°C (DO NOT TOUCH except
at handle) providing greater operational safety.
The air gun comes with an in-built Type "K"
thermocouple and an available temperature read-out
(optional).
Plug and play except for temperature read out |
| Unit
Features: |
Weight:
Approximately 2.2 Kg
Total
Length: 559 mm
Total
Height: 210 mm
Total
Width: 170 mm
Illuminated
ON/OFF switch for heater
Electronic
fan speed control
Perforated
SS protective guard
Efficient
recuperating wave technology for heat recovery
and cooler body
temperature
with perforated sheet.
Built-in Type K thermocouple
Light weight with compact ergonomic design
110V plug-in design
Rapid heat-up |
| Dimensions
and exit inlet features: |
See
above
Air outlet: 1/2" NPTF male
fitting
Exit: NPT fitting |
| Weight:
|
Light
weight with compact ergonomic design ~2.2 Kg |
| Temperature:
|
750°C
continuous for best life, 800°C maximum
|
| Airflow:
|
Minimum
required is 1.3 CFM at inlet
Adjust flow velocity to get minimum airflow
Unit may burn and fail if minimum airflow is
not provided |
| Voltage:
|
110VAC
|
| Frequency:
|
50/60
HZ |
| Current:
|
Approx.
9 Amps @ 110VAC |
| Power
Consumption: |
~1000
Watts |
| Output
Power Control: |
ON
/ OFF power switch Illuminated (for power
only). Do not turn on power if fan is
not working. |
| Handle:
|
Removable
by unbolting |
| Standard
Accessories: |
Display
- Not included (optional) see accessories
Built-in thermocouple can be linked for external
display
Optional: 3 ½ LCD display switchable
between °C and °F See TC Read unit listed
on site
|
|
|
MINIMUM AIR FLOW REQUIRED FOR SAFE USE. ENSURE
FAN IS ON AND BLOWING.
|
